The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] 50/200 as well as Chirp via a second Axiom?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] 50/200 as well as Chirp via a second Axiom?
03-21-18, 03:25 PM (This post was last modified: 03-21-18 03:56 PM by Chuck - Raymarine - Moderator.)
Post: #1
JPA Offline
Junior Member
**
 		Posts: 13
Joined: Mar 2017
Reputation: 0
[CA] 50/200 as well as Chirp via a second Axiom?
I am currently running an AXiom 9 RV with a RV-100 transducer. Although I purchased the appropriate Y-cable to use my existing B60 transducer with this system, I ended up reinstalling my old DSX500I so that I have both Chirp and traditional 50/200 available without switching cables. I am considering replacing the DSX500I with a second Axiom. If I were to connect my B60 transducer to a properly networked Axiom 7 DV through the appropriate adapter cable, would B60 data as well as RV-100 Data be available through both MFDs?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] 50/200 as well as Chirp via a second Axiom? - JPA - 03-21-18 03:25 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication