[CA] Tiller Pin Linear Drive 2
|
04-02-18, 11:46 AM
(This post was last modified: 04-04-18 02:09 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA] Tiller Pin Linear Drive 2
Hello, the tiller pin has sheared off on my Type 2 Linear drive. The only thing I could locate for replacement is Part #K065. I have no idea how old my unit is and am assuming the pin does look different now. I am attaching a picture of the broken tiller pin, it is 3 1/8 long in the picture...the missing piece of the bolt is still down in the bilge so I do not know its length. The shaft thickness is 1/2 inch. Could you tell me if the K065 is indeed the replacement pin for my installation. thanks
|
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA] Tiller Pin Linear Drive 2 - NautiDog - 04-02-18 11:46 AM
RE: [CA] Tiller Pin Linear Drive 2 - Chuck - Raymarine - Moderator - 04-04-18, 02:09 PM
RE: [CA] Tiller Pin Linear Drive 2 - NautiDog - 04-05-18, 06:13 AM
RE: [CA] Tiller Pin Linear Drive 2 - Chuck - Raymarine - Moderator - 04-05-18, 07:43 AM
|
User(s) browsing this thread: 1 Guest(s)