Raymarine forum / Raymarine Forums / Instruments v / [CA] iTC-5 as an interface to ST1 Displays

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] iTC-5 as an interface to ST1 Displays
05-14-18, 04:55 PM
Post: #11
Brian_Vogelaar Offline
Junior Member
**
 		Posts: 7
Joined: Jul 2017
Reputation: 0
RE: [CA] iTC-5 as an interface to ST1 Displays
Hi Chuck,
I have this system mostly together now. I have my AIS receiver connected to the E80 Classic via the NMEA port (dedicated to just AIS). The E80 is connected to the STng backbone as is the i70s. THe AIS targets show up nicely on the E80 but they don't show up on the i70s (AIS display). The other information shows up on the i70s so I know its talking fine on the STng network. The i70s AIS display shows "AIS off".
Is there something I need to do to get the AIS data onto the i70s?
Thanks!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] iTC-5 as an interface to ST1 Displays - Brian_Vogelaar - 05-14-18 04:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication