Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] AIS700 to Tacktick T122 and Actisense NGW-1
04-18-18, 10:20 PM (This post was last modified: 04-20-18 01:23 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] AIS700 to Tacktick T122 and Actisense NGW-1

I have a brand new AIS700 transponder and I would like to connect it to my existing instruments, which are:
- a Tacktick T122 Interface,
- 2 Standard horizon VHF: 1600 Explorer and HX471S.
- 1 Actisense NGW-1 (to connect to other devices such as autopilot.)

Looking to do 2 things:
- Connect both VHF directly to the transponder (safer connection config).
- Send the Tacktick 122 info (wind, speed over water, etc) and GPS (from the AIS) to the Actisense. To do so, I'm looking to connect the AIS as the input of the T122 and the Actisense (connected as a listener) as the output of the T122

In attached files the wiring diagrams of each devices.

I've try to figure out by myself but after a few hours, I'm clueless.
Any advise will be very appreciated.

Many thanks,

Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[CA] AIS700 to Tacktick T122 and Actisense NGW-1 - AlexandreBrisebois - 04-18-18 10:20 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us