ST40 clamping bracket CAD drawing

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

ST40 clamping bracket CAD drawing

04-05-16, 02:18 PM

Post: #1

alan-bc Offline

Junior Member

Posts: 3
Joined: Feb 2016
Reputation: 0

ST40 clamping bracket CAD drawing

Is there a 2D CAD drawing for the "clamping bracket" for an ST40 display?

I have some bulkhead thickness challenges, and so need a plate that's 1/8" thick, not a bracket that's 3/4" thick, as is the one supplied with the instruments.

I could just drill and file until I get it right, but since I have a CNC machine available, I'd rather just let the computer do all the work. :)

Thanks in advance.

There is NOTHING -- absolutely nothing -- half so much worth doing as simply messing about in boats.

« Next Oldest | Next Newest »

Messages In This Thread

ST40 clamping bracket CAD drawing - alan-bc - 04-05-16 02:18 PM

RE: ST40 clamping bracket CAD drawing - Steve - Raymarine - Moderator - 04-07-16, 09:04 AM

User(s) browsing this thread: 1 Guest(s)