The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] Axiom to Evolution Autopilot

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom to Evolution Autopilot
05-09-18, 10:53 AM (This post was last modified: 05-11-18 12:41 PM by Chuck - Raymarine - Moderator.)
Post: #1
rmillham Offline
Junior Member
**
 		Posts: 1
Joined: May 2018
Reputation: 0
[CA] Axiom to Evolution Autopilot
I want to link my Axiom to my newly purchased Evolution system with an ACU-150. On page 23 of the installation/ instruction manual it shows an example system layout (with no axiom). on page 45 it show an example system with a MFD (Axiom). However in this example it does not show the ACU. I am assuming the ACU links into the SeaTalk cable however the SeaTalk cable is 5 prong while the ACU uses 6 prongs. Does that mean I need to use a T to connect the two different cable?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Axiom to Evolution Autopilot - rmillham - 05-09-18 10:53 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication