Remote control unit not found

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum safeandsoundinc,

It is critical to ensure that the product software within each of the Raymarine products onboard the vessel have been updated with the latest software. As the SeaTalk to SeaTalkng Converter is currently blocking data source selection, its software is clearly not current. The RMK-9 and SeaTalk to SeaTalkng Converter software updates are included within the latest a/c/e/eS/gS-Series MFD software update. After updating the software with the system's MFDs, the Data Master MFD should be commanded to (HOME->SET-UP->MAINTENANCE->CHECK CARD FOR UPDATES). Doing so should then identify the remaining devices within your system which the microSD memory card contains updated software for and provide an option to then update the software within these devices. You can find more information on updating the software of the system's devices within section 3.21 System software updates of the LightHouse MFD's Release 16 Operation Instructions.

It has been additionally noted that you have referenced the Remote Control Unit Not Found. Should this actually be the message reported, then it would appear that you have erroneously tried to configure the RMK-9 using the options intended for the RCU-3 (i.e. HOME->SET-UP->SYSTEM SETTINGS->EXTERNAL DEVICES->REMOTE CONTROL). The RMK-9 is configured via the command sequence HOME-SET-UP->SYSTEM SETTINGS->EXTERNAL DEVICES->EXTERNAL KEYPAD.