Raymarine forum / Raymarine Forums / Networking / System Integration v / A127 and Ray60 Radio Power Connection

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A127 and Ray60 Radio Power Connection
04-07-16, 09:37 AM (This post was last modified: 04-07-16 09:37 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: A127 and Ray60 Radio Power Connection
Welcome to the Raymarine Forum Dave,

Neither the a127 MFD nor the Ray60 VHF Radio are designed to be powered by or supply power to a SeaTalkng backbone. Correspondingly, the MFD and VHF radio should each be powered via their respective power cable / harness. The SeaTalkng backbone should be powered from a single spur socket within the backbone. The spur socket to be used for powering the backbone should be located at the approximate midpoint of the backbone's LEN load. Please click here to view more information addressing powering of the marine electronics.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: A127 and Ray60 Radio Power Connection - Chuck - Raymarine - Moderator - 04-07-16 09:37 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication