Raymarine forum / Raymarine Forums / Instruments v / [CA11] Time reverts to UTC on i70 after Lighthouse 3 upgrade

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Time reverts to UTC on i70 after Lighthouse 3 upgrade
05-25-18, 08:34 AM (This post was last modified: 05-25-18 12:44 PM by Chuck - Raymarine - Moderator.)
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Time reverts to UTC on i70 after Lighthouse 3 upgrade
Tim,

Should the system feature more than one device which features a GPS receiver, then the MFD's Data Sources feature must be used to specify the GPS data source and Time data source which the system will utilize. Please verify that you have used this MFD configuration setting. It is also possible that another device with the system may be causing the reported issue. Should the problem persist after having addressed the Data Sources item specified above, then please attach a system diagram identifying the make/model of each marine electronics product within the system, and how these items have been interfaced to one another (i.e. via SeaTalkng / NMEA 2000, SeaTalk, NMEA 0183, Ethernet, etc.).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Time reverts to UTC on i70 after Lighthouse 3 upgrade - Chuck - Raymarine - Moderator - 05-25-18 08:34 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication