Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] autohelm with p-70 head not accepting garmin gwind nmea 2000 data
05-24-18, 06:38 PM (This post was last modified: 05-25-18 08:43 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] autohelm with p-70 head not accepting garmin gwind nmea 2000 data
Yes and no, it used a GMI 20 4" multi function display which I have 3 of, it is sending data to my garmin chart plotter but not my autohelm, but no not a "stand alone" display just for the wind unit.

its a mast unit that goes to a GND 10 black box Nexus/Nmea 2000 networked to the displays

https://buy.garmin.com/en-US/US/p/144123

I have spoken with garmin tech support as well, everything is functional on the nmea2000/garmin network, there suggestion was check PGN compatibility on your end, raymarmine network end is showing every device on on the network except the GND10 black box

http://static.garmin.com/pumac/GND_10_Install_ML.pdf
page 3 for PGN info
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] autohelm with p-70 head not accepting garmin gwind nmea 2000 data - relentless - 05-24-18 06:38 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)