[TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder

06-08-18, 08:11 AM (This post was last modified: 06-08-18 01:10 PM by Chuck - Raymarine - Moderator.)

Post: #7

Horacio Battistini Offline

Junior Member

Posts: 8
Joined: Apr 2016
Reputation: 0

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder

Hi Tom,

I understand your point of view, and agree that it is very difficult to determine previously the drive power consumption, but what IÂ´d like to see is the same estimation presented for the linear and rotatory drives (see attached PDF). For the hydraulic drive I havenÂ´t found these numbers.

Thanks in advance

Regards

Horacio

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Horacio Battistini - 05-26-18, 06:49 AM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Tom - Raymarine - Moderator - 05-29-18, 06:47 PM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Horacio Battistini - 05-30-18, 05:14 AM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Tom - Raymarine - Moderator - 05-30-18, 09:01 PM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Horacio Battistini - 05-31-18, 06:04 PM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Tom - Raymarine - Moderator - 05-31-18, 11:20 PM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Horacio Battistini - 06-08-18 08:11 AM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Tom - Raymarine - Moderator - 06-12-18, 07:03 PM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Horacio Battistini - 06-21-18, 10:00 AM

RE: [TG11] Use Type 3 Hydraulic Pump With a 255 cm3 Cylinder - Tom - Raymarine - Moderator - 06-27-18, 02:13 AM

User(s) browsing this thread: 1 Guest(s)