Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] Smart Pilot X-5 Wheel Pilot
05-29-18, 06:59 PM
Post: #2
RE: [TG11] Smart Pilot X-5 Wheel Pilot
Hello Metta Marine,

No, I'm sorry to say you can't do that: the EV1 is an autopilot course computer in its own right and your system won't react well/predictably to having two course computers installed.
We don't recommend trying to use external heading on an SPX pilot because although the EV gives very accurate heading data, using any external heading source disables some aspects of the SPX's steering algorithm which rely on the integration of the analogue fluxgate and rate-gyro data within the SPX. In addition, NMEA2000 heading is only 10Hz which actually isn't all that fast if you're trying to operate a pilot from it.

I'd keep using the fluxgate until it's time to replace the SPX.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Smart Pilot X-5 Wheel Pilot - Tom - Raymarine - Moderator - 05-29-18 06:59 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)