The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] T120 Wind Transducer lost signal

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] T120 Wind Transducer lost signal
06-04-18, 09:06 AM (This post was last modified: 06-07-18 02:56 PM by Chuck - Raymarine - Moderator.)
Post: #1
sthomason@ami.net Offline
Junior Member
**
 		Posts: 4
Joined: Feb 2016
Reputation: 0
[CA11] T120 Wind Transducer lost signal
In the diagnostics section of the wireless instrument I found the diagnostic section and checked the level. It was at a 5 most of the time but don't know if that is good or bad. We lose data from the T120 occasionally and have reboot the t111 master to get signal back.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] T120 Wind Transducer lost signal - sthomason@ami.net - 06-04-18 09:06 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication