Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] S1 computer with SeatalkNG heading/gyro input

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] S1 computer with SeatalkNG heading/gyro input
07-04-18, 05:16 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] S1 computer with SeatalkNG heading/gyro input
Steve,

The quote which you have referenced does not apply as it was addressing a heading source to be used by the autopilot course computer to perform its autopilot functions. However, as you have suggested, the data rate that will be supplied to the system by your S1 autopilot course computer will be 1Hz and will not be sufficiently fast enough to properly support use of the MARPA feature. Radar overlay will be supported with 1Hz heading input to the system.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] S1 computer with SeatalkNG heading/gyro input - Chuck - Raymarine - Moderator - 07-04-18 05:16 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication