Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] GPM400 to Axiom Pro upgrade/retrofit
07-17-18, 02:30 PM
Post: #8
RE: [CA11] GPM400 to Axiom Pro upgrade/retrofit
Ed,

Q1. s the bracket for the Axiom Pro 16 and Axiom XL 16 the same for the ball mount ? In that case, I dont have to wait for a trunnion and can go either way.
A1. As indicated, a ball mount plate (part #A80537) is available for the Axiom Pro 16 MFDs, permitting its use with a RAM mount. The Raymarine mount features pre-drilled holes to accommodate the RAM mount. The Axiom Pro 16 Ball Mount Plate is not designed for use with an Axiom XL 16 MFD. I would recommend contacting RAM Mounts for their corresponding parts to connect the MFD to the mount.

Q2. Any documentation on the Ram ball mount ? I dont see any anywhere. Just the existence of an A805347 ball mount for the Axiom Pro 16. trying to see what kind of Ram ball mount options I have.
A2. The drawing for the A80537 Axiom 16 Ball Mount Plate may be found here.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] GPM400 to Axiom Pro upgrade/retrofit - Chuck - Raymarine - Moderator - 07-17-18 02:30 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)