Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Recording video feed on A9 MFD?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Recording video feed on A9 MFD?
07-25-18, 12:49 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Recording video feed on A9 MFD?
Welcome to the Raymrine Forum rdavies1111,

As you have suggested, Raymarine's MFDs running LightHouse II software are exclusively designed to record video from an IP video source. Should the adapter which you have referenced produce an analog NTSC video signal, then you may want to consider interfacing the adapter to a video encoder (see related FAQ here) and then interface the encoder via Ethernet to the MFD as I do on my own boat.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Recording video feed on A9 MFD? - Chuck - Raymarine - Moderator - 07-25-18 12:49 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication