[CA] [CA11] ST60+ Wind display

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Marco,

The problem may indeed be indicative of a loose masthead, failing masthead, or failing wind instrument. After verifying that the masthead is securely fastened to its base, the masthead should be test. Please click here to view a FAQ addressing this subject. Should the masthead transducer test not indicate a problem with the transducer, then the fault would then be determined to be rooted within the ST60+ Wind Instrument. In the case of the latter, the ST60+ Wind Instrument would need to be replaced (typically with an i60 Wind), as Raymarine's Product Repair Center can no longer service ST60/ST60+ instruments. Should testing reveal a fault with the wind transducer, then the transducer should be sent to Raymarine’s Product Repair Center to be bench checked / serviced.