Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Losing the GPS Signal and "Go To" Function

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Losing the GPS Signal and "Go To" Function
07-22-19, 09:32 AM
Post: #13
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Losing the GPS Signal and "Go To" Function
RGG,

Please note that we have been unable to duplicate the reported issue. There were many odd issues related to the LH3 v3.8.x and v3.9.x software, many of which, were corrected through execution of the Power ON Factory Reset procedure. That said, LH3 v3.10.39 was released last week. It is recommended that this software update be installed within the system's MFDs and that the Power ON Factory Reset procedure then be executed on each of the system's MFDs to correct the reported behavior. Should the problem persist after having performed the items recommended above, then please respond according and include a system diagram of your system.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Losing the GPS Signal and "Go To" Function - Chuck - Raymarine - Moderator - 07-22-19 09:32 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication