Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Screen Temperature of e127

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Screen Temperature of e127
03-25-19, 02:54 PM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Screen Temperature of e127
cbd,

No GPS position FIX would be required to for the MFD to determine whether it has been interfaced to an autopilot. Begin by verifying that any SeaTalkng Spur Cable and RayNet Cable(s) which were previously interfaced to the MFD have been reconnected and secured using the sockets' locking ring. The Select Devices diagnostic feature may be used on the system's Data Master MFD to list all devices which the MFD is able to communicate with. Please display the Select Devices list and respond with each device listed and its respective version of software.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Screen Temperature of e127 - Chuck - Raymarine - Moderator - 03-25-19 02:54 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication