[TG] [TG11] e95 MFD won't boot

[JohnRE]

Tom,
Last Friday, I went to run the checks you suggested, and the e95 MFD worked fine. I could power it on and off and it booted every time. I went sailing on Saturday and it would not boot even after removing the chart card.
Today I opened the NavPod and measured 12.49 V with no load and 11.88 V driving a 10 watt bulb. Is that too much of a voltage drop? If so, do I need to run a larger gauge wire from the circuit breakers to the NavPod? If not, should I send the e95 in for repair?
John