European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Multifunction Displays 
/
[TG] [TG11] RL80C Plus system - all functions work but not at both MFDs
/
[TG] [TG11] RL80C Plus system - all functions work but not at both MFDs
|
[TG] [TG11] RL80C Plus system - all functions work but not at both MFDs
|
|
10-12-18, 01:32 AM
Post: #4
|
|||
|
|||
|
RE: [TG11] RL80C Plus system - all functions work but not at both MFDs
I'd suspect that radar is physically connected to the lower display and sounder to the lower. RL80C is a radar (+optional chart) rather than sounder display so if you're seeing sounder capability on the lower display and it definitely is RL80C (not L12x0C, for example) then that implies that you have a DSM250 sounder module connected to that display over HSB2 and that part of the network is working. If it's an L12x0 on the other hand then this can take a transducer connection directly, so nothing is proven about the HSB2 network.
Do you have a DSM somewhere in the network, connected via a Y-cable? the Y could be at the DSM or at the lower display. Does either of the products that does not have a Y, have a terminator? Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[TG11] RL80C Plus system - all functions work but not at both MFDs - Boblloyd - 10-07-18, 01:50 PM
RE: [TG11] RL80C Plus system - all functions work but not at both MFDs - Tom - Raymarine - Moderator - 10-07-18, 08:16 PM
RE: [TG11] RL80C Plus system - all functions work but not at both MFDs - Boblloyd - 10-09-18, 05:18 AM
RE: [TG11] RL80C Plus system - all functions work but not at both MFDs - Tom - Raymarine - Moderator - 10-12-18 01:32 AM
RE: [TG11] RL80C Plus system - all functions work but not at both MFDs - Boblloyd - 10-13-18, 07:08 PM
|
User(s) browsing this thread: 1 Guest(s)