[CA11] Autopilot Control eS127 / S3G / ST8001

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Autopilot Control eS127 / S3G / ST8001

10-29-18, 09:44 PM (This post was last modified: 10-30-18 08:18 AM by Chuck - Raymarine - Moderator.)

Post: #5

hynespa Offline

Junior Member

Posts: 20
Joined: Sep 2018
Reputation: 0

RE: [CA11] Autopilot Control eS127 / S3G / ST8001

Hi Chuck,

This weekend I installed both a Raymarine E15023 Smart Pilot Controller as well as a Mercury NMEA2000 gateway. I have attached an updated network diagram showing how each were attached. It functions correctly in controlling the autopilot / direction of the boat.

Thanks again Chuck for all your help with this!

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Autopilot Control eS127 / S3G / ST8001 - hynespa - 10-07-18, 08:09 PM

RE: [CA11] Autopilot Control eS127 / S3G / ST8001 - Chuck - Raymarine - Moderator - 10-08-18, 02:09 PM

RE: [CA11] Autopilot Control eS127 / S3G / ST8001 - hynespa - 10-10-18, 10:09 AM

RE: [CA11] Autopilot Control eS127 / S3G / ST8001 - Chuck - Raymarine - Moderator - 10-10-18, 10:56 AM

RE: [CA11] Autopilot Control eS127 / S3G / ST8001 - hynespa - 10-29-18 09:44 PM

RE: [CA11] Autopilot Control eS127 / S3G / ST8001 - Chuck - Raymarine - Moderator - 10-30-18, 08:18 AM

User(s) browsing this thread: 1 Guest(s)