[CA11] M232 and Cam220

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] M232 and Cam220

10-19-18, 07:48 AM

Post: #6

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] M232 and Cam220

Mark,

Q. Does it matter what network port on the C127 the Cam220 is connected to?
A. Negative.

Q2. Does it matter if the cam is powered up while powering up the MFD, or should I power it up after the MFD is up and running?
A2. Please see the comment within my initial response addressing that you wait for the MFD to complete initializing prior to energizing the circuit supplying power to the IP camera(s).

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] M232 and Cam220 - boatmanmark - 10-16-18, 08:55 PM

RE: [CA11] M232 and Cam220 - Chuck - Raymarine - Moderator - 10-17-18, 09:52 AM

RE: [CA11] M232 and Cam220 - boatmanmark - 10-17-18, 06:49 PM

RE: [CA11] M232 and Cam220 - Chuck - Raymarine - Moderator - 10-18-18, 09:48 AM

RE: [CA11] M232 and Cam220 - boatmanmark - 10-18-18, 08:11 PM

RE: [CA11] M232 and Cam220 - Chuck - Raymarine - Moderator - 10-19-18 07:48 AM

RE: [CA11] M232 and Cam220 - boatmanmark - 10-19-18, 07:05 PM

RE: [CA11] M232 and Cam220 - boatmanmark - 10-19-18, 10:08 PM

RE: [CA11] M232 and Cam220 - Chuck - Raymarine - Moderator - 10-22-18, 01:03 PM

User(s) browsing this thread: 1 Guest(s)