[CA] [CA11] Maretron Instruments

[Chuck - Raymarine - Moderator]

Ron,

Raymarine products are simply designed to repeat supported data items which are present on the SeaTalkng / NMEA 2000 backbone. Barometric pressure, air temperature, and humidity are among these supported data items and no configuration of the MFD need be performed other than to configure a panel of the Dashboard application to display these data items. Should the NMEA 2000 device require configuration to enable transmission of this data within the corresponding PGN, then such configuration must be performed in the manner specified by the manufacturer of the NMEA 2000 device. Any such configuration of the third party device would not be supported by the MFD.