The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Radar v / [CA] [CA11] Replace Quantum QC24C with new Quantum 2?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Replace Quantum QC24C with new Quantum 2?
12-11-18, 01:02 PM (This post was last modified: 12-11-18 03:05 PM by Chuck - Raymarine - Moderator.)
Post: #1
rmclaughlinmo Offline
Junior Member
**
 		Posts: 2
Joined: Nov 2018
Reputation: 0
[CA11] Replace Quantum QC24C with new Quantum 2?
I have a late 2016 model Quantum QC24C but love the new features of the Doppler equipped Quantum 2 radar w Axiom software.

1. Are the connections between the two identical, or would new/different cables and/or connectors be required if I wanted to replace the older QC24C with the new Quantum 2? Could I just unplug and remove the old unit and plug in the new unit?

2. Are the mounting holes for the domes identical?

3. I'm running a late 2016 eS97 MFD, still on the pre-Axiom software. I believe there is no issue to upgrading to Axiom when I'm ready (I've delayed due to watching for more of the sailing features to be supported in Axiom. Maybe to simplify my search for the latest on the old/new feature comparison list you might have that URL handy as well?) Other than that, are there any restrictions/issues with the eS97 supporting the new Quantum 2?

Thanks! Bob
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Replace Quantum QC24C with new Quantum 2? - rmclaughlinmo - 12-11-18 01:02 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication