The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG] ITC-5 compatibility with ST5000+

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] ITC-5 compatibility with ST5000+
01-28-19, 09:18 PM (This post was last modified: 01-29-19 12:15 PM by Derek - Raymarine - Moderator.)
Post: #1
RobNZL Offline
Junior Member
**
 		Posts: 2
Joined: Jan 2019
Reputation: 0
[DG] ITC-5 compatibility with ST5000+
Is the ITC-5 compatible with the ST5000+ autopilot?

I currently have ST60 Wind and Tridata with ST5000+ autopilot and separate Nmea2000 chart plotter. I was looking to add seatalkng backbone with i70s and ITC-5. Thought the ST5000+ could be connected to the Seatalkng network via the Seatalk1 to Seatalkng converter.

This leaves me with instrument connections. I know the wind, depth and speed/temperature Tranducers (all analog Raymarine/Airmar) can connect to ITC-5. My question is can the fluxgate compass and rudder reference sensors also connect to the ITC-5 or do they need to connect directly to the back of the ST5000+ unit?

I had read SPX and evolution course pilots needed direct connection so wanted to check for ST5000+. Thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG] ITC-5 compatibility with ST5000+ - RobNZL - 01-28-19 09:18 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication