[CA] [CA11] Axiom 9: LightHouse 3 V3.8.97 reboot and network problem

[paler]

LH 3 V3.6.32 has been running without any issues on both the data master and slave since I purchased both units. The slave was recently sent back to Raymarine for a power swipe issue. The slave unit came back from Raymarine upgraded to LH 3 V3.8.97.

Upon re-installation, the slave keeps rebooting. It also turns on by itself after being powered down via swipe button.

Furthermore, the unit will not "see" the transducer/fishfinder data from the DM connected via Raynet.

While I was troubleshooting I switched the Axiom 9 RV (V3.6.32) from DM to slave and made the Axiom 9 (V 3.8.97) the DM. After this, the Axiom 9 RV (V3.6.32) also started rebooting at random intervals.

I have downgraded both units to V3.7.70 and the random reboots have dissapeared and both units display the fishfinder with data from the transducer. In other words, everything is back in order.

Hope this helps optimize the latest version of LH 3.