[CA11] Proper power config for E22158

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Proper power config for E22158

02-07-19, 09:41 AM

Post: #5

amajamar Offline

Junior Member

Posts: 4
Joined: Feb 2019
Reputation: 0

RE: [CA11] Proper power config for E22158

Chuck,

Please clarify the following:

My diagram shows power to both the NMEA 2000 backbone AND the E22158.

That seems to be in conflict with the basic "one power point" NMEA 2000 rules.

A previous thread located here: http://forum.raymarine.com/showthread.php?tid=2327 seems to indicate that the power connection for the E22158 and devices connected to it (ST60 tridata, in my case) will receive power from the existing NMEA 2000 backbone.

Which configuration is correct?

Thanks,

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Proper power config for E22158 - amajamar - 02-06-19, 02:54 PM

RE: [CA11] Proper power config for E22158 - Chuck - Raymarine - Moderator - 02-06-19, 03:41 PM

RE: [CA11] Proper power config for E22158 - amajamar - 02-06-19, 04:59 PM

RE: [CA11] Proper power config for E22158 - Chuck - Raymarine - Moderator - 02-06-19, 05:14 PM

RE: [CA11] Proper power config for E22158 - amajamar - 02-11-19, 12:47 PM

RE: [CA11] Proper power config for E22158 - amajamar - 02-07-19 09:41 AM

RE: [CA11] Proper power config for E22158 - Chuck - Raymarine - Moderator - 02-07-19, 11:11 AM

RE: [CA11] Proper power config for E22158 - Chuck - Raymarine - Moderator - 02-11-19, 01:35 PM

User(s) browsing this thread: 1 Guest(s)