[CA11] st5000+ problems after re-commissioning

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] st5000+ problems after re-commissioning

03-08-19, 12:44 AM

Post: #7

Tizor

Junior Member

Posts: 9
Joined: May 2018
Reputation: 0

RE: [CA11] st5000+ problems after re-commissioning

I just wanted to report back and say thank you, Chuck. I replaced the fluxgate compass and all is well again. I appreciate your help. It's a very valuable service that you provide here.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] st5000+ problems after re-commissioning - Tizor - 02-26-19, 08:44 PM

RE: [CA11] st5000+ problems after re-commissioning - Chuck - Raymarine - Moderator - 02-27-19, 03:05 PM

RE: [CA11] st5000+ problems after re-commissioning - Tizor - 03-01-19, 12:57 AM

RE: [CA11] st5000+ problems after re-commissioning - Chuck - Raymarine - Moderator - 03-01-19, 10:00 AM

RE: [CA11] st5000+ problems after re-commissioning - Tizor - 03-01-19, 08:47 PM

RE: [CA11] st5000+ problems after re-commissioning - Chuck - Raymarine - Moderator - 03-04-19, 02:29 PM

RE: [CA11] st5000+ problems after re-commissioning - Tizor - 03-08-19 12:44 AM

RE: [CA11] st5000+ problems after re-commissioning - Chuck - Raymarine - Moderator - 03-08-19, 07:21 AM

User(s) browsing this thread: 1 Guest(s)