[CA] [CA11] COURSE COMPUTER CHANGE

[ChrisR]

hi chuck

back again n sorry to say, nothing is ever simple...

i have replaced the T100 course computer with an S1, which understand should be compatible.

some things seem ok...it recognises the RRU / fluxgate compass and does most things correctly, but when attempting to get into calibration mode (via long press on Standby button), the only screen that will appear is "DEV 17' " with a 3 digit heading underneath. there is no way to change the deviation setting however the 3 digit heading is easily changed

press display and "COMPASS ADJUST" appears, alternating with "DEV 17' "...nothing else. cannot see anyway to access the calibration menu

do you have any advice please ?

cheers,

chris