Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Mercury Smartcraft to NMEA(sea talk ng) to Axiom MFD
04-01-19, 12:39 PM
Post: #2
RE: [CA11] Mercury Smartcraft to NMEA(sea talk ng) to Axiom MFD
Welcome to the Raymarine Forum Rookie Fisherman,

The information which you are seeking may be found within the Fuel/Trip Manager section of Chapter 5.8 My Data of the LightHouse 3.8 Advanced Operation Instructions. From within the Fuel Manager, the operator may configure the system with full tanks or with a partial fill. Please note that the fuel level reported by the Fuel Manager feature is reflect within the All Tanks data group (TTE, DTE, Fuel (season), Fuel (trip), Est. Fuel, Total Fuel (%), etc.) versus individual tank levels. The latter require that the system be interfaced to NMEA 2000 fluid level sensors which are installed within each of the boat's tanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Mercury Smartcraft to NMEA(sea talk ng) to Axiom MFD - Chuck - Raymarine - Moderator - 04-01-19 12:39 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)