The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Connecting eS78 - STNG or RayNet?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Connecting eS78 - STNG or RayNet?
03-31-19, 08:37 PM (This post was last modified: 04-01-19 02:42 AM by Louise - Raymarine - Moderator.)
Post: #1
Rdubs Offline
Junior Member
**
 		Posts: 23
Joined: Jul 2017
Reputation: 0
[CA11] Connecting eS78 - STNG or RayNet?
Hi Chuck,
I just bought an eS78 to install inside the cabin at the nav station. It will go along with the e95 and eS98 that I have at the helm stations. But what are my options for integrating the eS78 into the network? I know that the most straight-forward method would to use a RayNet-to-RayNet cable and connect the Network port on the eS78 into the Network port on one of the other MFD's or the 5-way switch, but it is a very long way from the nav station to another RayNet connection. I know the eS78 also has a STNG connector, and there are numerous STNG 5-way connectors near the nav station. So can I connect the eS78 via STNG cable to the STNG 5-way connector and have it fully integrate into the network? Or do I lose any functionality compared with connecting from the Network port to another Network connection?

Many thanks
'Dubs
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Connecting eS78 - STNG or RayNet? - Rdubs - 03-31-19 08:37 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication