Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] Is the Airmar T80 temperature transducer compatible with the ICT5?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Is the Airmar T80 temperature transducer compatible with the ICT5?
04-09-19, 11:57 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Is the Airmar T80 temperature transducer compatible with the ICT5?
Welcome to the Raymarine Forum mystery,

Please note that Airmar's T80 is designed for use with Garmin and Mercury products. The T80 transducer has not been tested for use with Raymarine Products. In this case, it would be recommended that Gemeco, Inc. (Airmar’s US distributor (803 693 0777)) be contacted to determine whether this transducer may be used with Raymarine's analog instrument products which are capable of sensing temperature. If so, Gemeco may be able to supply you information concerning which color coded terminals of a Raymarine temperature sensing instrument (or iTC-5) each of the T80's leads should be connected to.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Is the Airmar T80 temperature transducer compatible with the ICT5? - Chuck - Raymarine - Moderator - 04-09-19 11:57 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication