The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG11] Tillerpilot ST2000 and S100

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Tillerpilot ST2000 and S100
04-18-19, 02:00 PM (This post was last modified: 04-22-19 03:47 PM by Chuck - Raymarine - Moderator.)
Post: #1
bgudm Offline
Junior Member
**
 		Posts: 5
Joined: Aug 2018
Reputation: 0
[DG11] Tillerpilot ST2000 and S100
Hi,
I bought a boat last year with a standalone ST2000 - which works fine. But now I also bought a s100 remote control with the base station. I'm not sure how to wire this up to get it to work. I don't have any Seatalk and the original connecting plug is no more on the ST2000. The cable has been extended, only using the two 12V power lines.

Any advice will be appreciated ?

Bjarni
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] Tillerpilot ST2000 and S100 - bgudm - 04-18-19 02:00 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication