[CA] [CA11] Failed Rudder Drive Test

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum David,

Please note that the hydraulic linear drive shown was not produced by Raymarine. Should you provide some photos which clearly show all information printed on the drive unit's label, then if may be possible to identify the drive unit's make/model and from there, identify its specified. No rudder reference transducer has been interfaced to the ACU. Accordingly, it will not be able to sense rudder angle. The system will support a virtual rudder angle feature. However, the virtual rudder angle feature will only be shown when the autopilot is operating in Auto or Track mode when the vessel is underway and making way.