Raymarine forum / Raymarine Forums / Instruments v / [DG] [DG11] eS98 and wind transducer compatibility

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] eS98 and wind transducer compatibility
05-09-19, 04:30 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] eS98 and wind transducer compatibility
Hi Niiiad

Thank you for your enquiry.

Raymarine do not have a windvane that will connect direct to the eS98 display.

The solution is to connect an i60 Wind system, part number E70150, which includes the Masthead transducer, through STng to the eS98. The I60 display is used to calibrate the masthead transducer for the wind angle and alarms for wind speed and so this ensures the correct information is displayed on the eS98.

Regards

Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG11] eS98 and wind transducer compatibility - Derek - Raymarine - Moderator - 05-09-19 04:30 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication