[CA11] Axiom Pro no data on NMEA2000

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Axiom Pro no data on NMEA2000

05-10-19, 03:46 PM (This post was last modified: 05-10-19 03:52 PM by Chuck - Raymarine - Moderator.)

Post: #3

LimaBavo Offline

Junior Member

Posts: 19
Joined: Jan 2017
Reputation: 0

RE: [CA11] Axiom Pro no data on NMEA2000

Thanks Chuck!!

I do have power on the nmea2000 with a total LEN calculated at about 4, so voltage is good at the YDES device.

So question: if I do a MicroSD card with the log file log_stng_data and it captured the Axiom Pro's nmea2000 stream I could assume the Axiom is good?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Axiom Pro no data on NMEA2000 - LimaBavo - 05-09-19, 05:45 PM

RE: [CA11] Axiom Pro no data on NMEA2000 - Chuck - Raymarine - Moderator - 05-10-19, 08:46 AM

RE: [CA11] Axiom Pro no data on NMEA2000 - LimaBavo - 05-10-19 03:46 PM

RE: [CA11] Axiom Pro no data on NMEA2000 - Chuck - Raymarine - Moderator - 05-10-19, 03:54 PM

RE: [CA11] Axiom Pro no data on NMEA2000 - LimaBavo - 05-15-19, 06:55 PM

RE: [CA11] Axiom Pro no data on NMEA2000 - Chuck - Raymarine - Moderator - 05-16-19, 08:54 AM

RE: [CA11] Axiom Pro no data on NMEA2000 - LimaBavo - 06-12-19, 06:41 PM

RE: [CA11] Axiom Pro no data on NMEA2000 - Chuck - Raymarine - Moderator - 06-13-19, 08:31 AM

RE: [CA11] Axiom Pro no data on NMEA2000 - LimaBavo - 06-13-19, 08:36 AM

RE: [CA11] Axiom Pro no data on NMEA2000 - Chuck - Raymarine - Moderator - 06-13-19, 08:59 AM

User(s) browsing this thread: 2 Guest(s)