[CA] [CA11] E90W MFD and Flir M324CS Camera

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum DANMES,

Unlike the MFD's which followed the E-Series Widescreen MFDs, it was necessary to use thermal cameras and JCUs having specific class A static IP addresses assigned to them. For this reason, FLIR had produced Raymarine branded thermal cameras and JCUs to support plug and play operation with Raymarine MFDs. In contrast, FLIR branded thermal cameras are configured at the factory to support Dynamic Host Configuration Protocol (DHCP) network management protocol. Accordingly, it will be necessary to interface the thermal camera and JCU (one at a time) to a computer to access to the the device's web page (recommend using Internet Explorer as the browser) to then configure these devices with the following static IP addresses:
- FLIR M/MD Series Thermal Cameras: 10.21.0.2
- FLIR JCU: 10.21.0.6

The Login ID and password for logging into the M-Series thermal camera's web are "admin" and "indigo" respectively.