Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] UAV with Axiom
05-23-19, 03:48 PM (This post was last modified: 05-23-19 03:48 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] UAV with Axiom
Welcome to the Raymarine Forum Felipe,

Q1. if I conect the card reader on the MFD, Can I use the card reader as a extension?
A1. Negative. The UAV remote's USB cable must be plugged directly into the MFD's USB port. Raymarine is presently considering introduction of a USB extension which would terminate in a bulkhead jack (only for use with the UAV remote).

Q2. Can I use the USB port to conect the cable of my remote control with Axiom XL?
A2. Negative.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] UAV with Axiom - engenharia2 - 05-21-19, 02:38 PM
RE: [CA11] UAV with Axiom - Chuck - Raymarine - Moderator - 05-23-19 03:48 PM
RE: [CA11] UAV with Axiom - engenharia2 - 05-24-19, 07:44 AM
RE: [CA11] UAV with Axiom - mattsteg - 05-24-19, 09:21 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)