[CA] [CA11] Axiom Yamaha Engine Data

[Chuck - Raymarine - Moderator]

Hairraiser,

Q1. So technically, building the separate engine network plus power then bridging with the EIC-100 to the existing NMEA network should work?
A1. This would be correct as long as the Yamaha engines support integration with Yamaha's CommandLink or CommandLink Plus products. Your diagram appears to be lacking a 12V input to the engine backbone ... as would be permitted by a CommandLink Hub.

Q2. This would allow me to use my existing spare network components and remove the need for a Yamaha hub and new cables. Correct?
A2. If the conditions specified within my response to Q1 have both been satisfied, then your statement would indeed appear to be correct.