The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ES78 Not Displaying Est. Fuel Remaining or Trim
06-04-19, 01:09 PM (This post was last modified: 06-04-19 03:16 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] ES78 Not Displaying Est. Fuel Remaining or Trim
Have a Raymarine es78 displaying engine data from a 2017 Yamaha 200, everything appears to work as it should except for fuel and trim. Not worried all that much about trim, I have tried both pink wire hooked up and not hooked up, but neither works. Fuel is more important. I receive MPG as well as GPH, I have set up the fuel manager within the Raymarine, plugged in tank capacity and logged when the tank is full. Fuel used and estimated fuel remaining both don't work. Just shows blank. Not sure what the issue is, but fuel used should be easily derived from gph and time or mpg and distance, both of which are available. Based on the FAQ I understand I can't get tank level display, but estimated should work. Any help would be great.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] ES78 Not Displaying Est. Fuel Remaining or Trim - Hoehn000 - 06-04-19 01:09 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)