[CA11] Adding Boundary Lines to an E120 Chart Plotter

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Adding Boundary Lines to an E120 Chart Plotter

06-12-19, 02:04 PM

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Adding Boundary Lines to an E120 Chart Plotter

Welcome to the Raymarine Forum tdrichards,

I would typically recommend that routes be created for such purposes. Routes feature waypoints connected by leg lines. Such routes, whose waypoints include the corners of the restricted area, may be shown or hidden to meet your needs.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Adding Boundary Lines to an E120 Chart Plotter - tdrichards - 06-12-19, 12:21 PM

RE: [CA11] Adding Boundary Lines to an E120 Chart Plotter - Chuck - Raymarine - Moderator - 06-12-19 02:04 PM

RE: [CA11] Adding Boundary Lines to an E120 Chart Plotter - tdrichards - 06-12-19, 03:57 PM

RE: [CA11] Adding Boundary Lines to an E120 Chart Plotter - Chuck - Raymarine - Moderator - 06-13-19, 09:22 AM

RE: [CA11] Adding Boundary Lines to an E120 Chart Plotter - tdrichards - 06-18-19, 12:49 PM

RE: [CA11] Adding Boundary Lines to an E120 Chart Plotter - Chuck - Raymarine - Moderator - 06-18-19, 01:40 PM

User(s) browsing this thread: 1 Guest(s)