The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] MFD Master/ Slave connections
06-14-19, 06:37 PM (This post was last modified: 06-18-19 12:14 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] MFD Master/ Slave connections
I have a Axiom Pro12 set up as a Master and a es98 set up as the slave connected by a raynet cable plugged into network ports on each. I have Radar plugged in to the Pro 12 second network port. I am adding a SR200 infolink SiriusXM Receiver. Question, If I move the radar to the slave es98 spare network port so that I can plug the sr200 into the Master Axiom 12 second network port or do I need to add HS5 network switch? I read that the SR200 needed to be plugged in to the Master. Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] MFD Master/ Slave connections - Chase263 - 06-14-19 06:37 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)