The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] I70s Erroneous Temp Reading Underway

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] I70s Erroneous Temp Reading Underway
06-17-19, 08:46 AM (This post was last modified: 06-19-19 03:11 PM by Chuck - Raymarine - Moderator.)
Post: #1
Sadey Offline
Junior Member
**
 		Posts: 10
Joined: Jan 2019
Reputation: 0
[CA11] I70s Erroneous Temp Reading Underway
My I70s is networked to my NMEA200 system. While stationary the I70s, ES128 and ES127 all read normal water temperature, to darn cold but normal for a Lake Michigan this time of year. However while under way the I70s will read a water temperature of 29.2 degrees Celsius. All other functions including engine parameters read normally. Any thoughts? I have a depth and speed transducer connected through an ITC5 block and a chirp transducer connect directly to the ES128. I use the ITC5 for speed and depth and the chirp for a visual of bottom contouring.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] I70s Erroneous Temp Reading Underway - Sadey - 06-17-19 08:46 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication