Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Cannot identify the correct Data field for PGN 130576
07-16-19, 07:38 AM
Post: #6
RE: [CA11] Cannot identify the correct Data field for PGN 130576
pinkish_panther,

Thanks for the additional information. An additional problem report will be generated to seek correction of the behavior stated. In support of correcting this problem, it has been requested that a NMEA 2000 log files be generated from the system when the engines and electronics are operating ... only a minute or so of data should be required. During the capture interval it is recommended that the tabs be raised and lowered. Extracting the log_stng_data from the attached compressed folder to the root level directory of a microSD memory card, inserting this microSD memory card into the Data Master MFD's memory card reader, and then operating the equipment in the manner described will cause the MFD to record NMEA 2000 data to a log file to be stored on the microSD memory card. Please then attach the NMEA 2000 data log file to this thread to include within the submitted problem report.


Attached File(s)
.zip  log_stng_data.zip (Size: 124 bytes / Downloads: 168)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Cannot identify the correct Data field for PGN 130576 - Chuck - Raymarine - Moderator - 07-16-19 07:38 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)