Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Align compass to GPS
07-01-19, 08:39 AM
Post: #2
RE: [CA11] Align compass to GPS
George,

The maximum deviation sensed by the EV-1 CCU is too large. It is generally recommended that the maximum sensed deviation not exceed 9 degrees. Accordingly, it is recommended that the area around the EV-1/EV-2 CCU be inspected for magnetic field producing objects. No such object should be located within 3' of the EV-1 CCU. Please click here to view a FAQ addressing this subject. Should any source responsible for producing this deviation not be able to be relocated, then an alternate suitable source for the EV-1 CCU should be identified and the EV-1 CCU should then be installed in that location. After doing so, the Restart Compass command (MENU->SET-UP->AUTOPILOT CALIBRATION->COMMISSIONING->RESTART COMPASS) should be executed.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Align compass to GPS - Chuck - Raymarine - Moderator - 07-01-19 08:39 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)