Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW11] DSM30 or 300 wont take update from E90W
07-03-19, 01:21 PM (This post was last modified: 07-09-19 10:08 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] DSM30 or 300 wont take update from E90W
HI,
I have an E90W with a DSM30. Been trying to update the SW but keep getting the error (transfer failed) but I have no issues connecting and using the current DSM30. Just wanted to update the SW to see if I could get the TEMP to work with my B744V transducer.
I also have a DSM300 and when thats connected it all works fine also but the update wont transfer either. Same error. I am using a Raymarine switch for the ethernet backbone.
Is there any trick to get this update over to the DSM's? I have a CF card with the 4.20 SW and the E90W boots into the update SW app without any issues.

Thanks
Bill
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] DSM30 or 300 wont take update from E90W - unixdood - 07-03-19 01:21 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us