The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [LW] [LW11] i50 Tridata / SPX-10

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] i50 Tridata / SPX-10
07-08-19, 02:34 AM (This post was last modified: 07-09-19 06:40 AM by Louise - Raymarine - Moderator.)
Post: #1
9203R Offline
Junior Member
**
 		Posts: 8
Joined: Jul 2019
Reputation: 0
[LW11] i50 Tridata / SPX-10
Hi,

I am progressively updating an older ST system to STNG.
Can you help me with a few questions?

1. Can the i50 Tridata perform full calibration of speed and depth transducers? My speed and depth transducers are currently connected to separate ST60 speed and ST60 depth displays - would the i50 Tridata be the best way to get that data into a properly powered and terminated STNG backbone without using an ITC-5? I have already done something similar with an i60 Wind display.

2. Can an SPX-10 pilot computer power one or two ST6002 autopilot heads through ST? I know the SPX-10 is not designed to power a whole ST system but would it work for just one or two displays?

3. Will the ST6002 head "see" wind data if it goes into the SPX-10 through STNG? Also, can you point me in the direction of the cable colours for STNG (as I assume I need to cut the end off the cable to connect it to the SPX-10)?

Many thanks.
Find all posts by this user
Thread Closed 


Messages In This Thread
[LW11] i50 Tridata / SPX-10 - 9203R - 07-08-19 02:34 AM
RE: [LW11] i50 Tridata / SPX-10 - 9203R - 09-03-19, 05:09 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication