[TG11] Wind Vane Mounting Orientation

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] Wind Vane Mounting Orientation

07-24-19, 02:47 AM (This post was last modified: 08-01-19 08:07 AM by Chuck - Raymarine - Moderator.)

Post: #2

Tom - Raymarine - Moderator Offline

Administrator

Posts: 1,067
Joined: Nov 2017
Reputation: 7

RE: [TG11] Wind Vane Mounting Orientation

Hello mjbowden,

Yes, the standard post-installation wind angle alignment calibration step will do this. Just be aware that you're likely to see much less accurate wind angles when the wind is forward of the beam because of the turbulence aft of the mast-head.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] Wind Vane Mounting Orientation - mjbowden - 07-17-19, 06:31 AM

RE: [TG11] Wind Vane Mounting Orientation - Tom - Raymarine - Moderator - 07-24-19 02:47 AM

RE: [DG11] Wind Vane Mounting Orientation - mjbowden - 07-30-19, 02:51 PM

RE: [TG11] Wind Vane Mounting Orientation - billc42 - 07-24-19, 12:51 PM

RE: [DG11] Wind Vane Mounting Orientation - Derek - Raymarine - Moderator - 07-25-19, 07:16 AM

RE: [TG11] Wind Vane Mounting Orientation - Tom - Raymarine - Moderator - 08-04-19, 06:51 PM

RE: [TG11] Wind Vane Mounting Orientation - mjbowden - 08-05-19, 05:15 AM

RE: [TG11] Wind Vane Mounting Orientation - Tom - Raymarine - Moderator - 08-06-19, 04:54 PM

User(s) browsing this thread: 1 Guest(s)