The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Moving Secondary MDF between Boats

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Moving Secondary MDF between Boats
07-19-19, 10:41 AM (This post was last modified: 07-24-19 01:15 PM by Chuck - Raymarine - Moderator.)
Post: #1
lwitty Offline
Junior Member
**
 		Posts: 22
Joined: Feb 2016
Reputation: 0
[CA11] Moving Secondary MDF between Boats
Hello -

I have a sailboat and a small fishing boat in which I move an a98 back and forth. When on the sailboat, the a98 operates as the secondary display where an e125 is the master.

When the a98 is in the sailboat, it is connected via the ethernet network and operates perfectly.

When the a98 is on the fishing boat, it is connected to a transducer and nothing else.

I noticed when I placed waypoints on the a98 while installed on the fishing boat then moved the display back to the sailboat, I lost all of the waypoints. Is there a way to maintain the waypoints on the slave when moving it back and forth? Seems storing the waypoints on a card is a likely work around but would prefer storing internally if an option.

All software on both networks is on the latest version (according to "Check Online for Updates".
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Moving Secondary MDF between Boats - lwitty - 07-19-19 10:41 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication